PRO RMTi-1 Rotating Machine Tester with Thermal Imager
₹95,728.00 including GST @18%
NEW LAUNCH!!
Tester with Thermal Imager, VFD, Digital Insulation. Resistance with Polarisation Index and DAR measurement, Low Resistance measurement using 4 wire method, Bluetooth, Data Logger and K type thermocouple temperature.
- Description
- Additional information
- SPECIFICATIONS
- CATALOGUE
- Reviews (0)
Description
While testing a motor the important parameters to test are the Insulation Resistance, Winding Resistance, Temperature of the Motor and all Electrical Parameters like the current, voltage and the voltage of the Variable Frequency Drive.
Measuring these parameters enables the user to know how efficiently the motor is working and also to decide upon the pre-emptive maintenance of the motor.
The Metravi RMTi-1 is a combination of Digital Multimeters that can work on VFD, Digital Insulation. Resistance Tester with Polarisation Index and DAR measurement, Low Resistance measurement using 4 wire method and a Thermal Imager.
The instrument has bluetooth to connect it to your mobile device so that you can record the readings on the go.
Not to mention it has a Data Logger and a K type thermocouple that can be used to measure temperature.
A professional, True RMS Multimeter and Insulation Tester with built-in Thermal Imager, featuring a TFT color LCD display, provides fast A/D converting sampling time and high accuracy, the RMTi-1 makes it easy to find and solve problems of production equipment. It helps in taking measurements safely with a double-moulded plastic housing and IP65 waterproof features.Â
Additional information
Brand | |
---|---|
Model | |
Warranty | |
Colour | |
Display | |
Diode & Continuity | |
Data Recall | Data Recall |
Variable Frequency Drive | VFD |
Insulation Test | Insulation Test |
Power Source | Battery Operated |
Battery Type | Li-Ion Rechargeable |
Polarization Index Test | PI |
Dielectric Absorption Ratio | DAR |
Certifications | CAT III 1000V, CAT IV 600V, Pollution Grade 2, IEC/EN-61010-1, IEC/EN-61326-1, IEC/EN-61557-1-2-4 |
Low Battery Indication | |
Auto Power Off | |
Bargraph | Bargraph |
Sampling Time | 3 times/sec |
Field of View (FoV) | 21°x 21°/ 0.5m |
Spatial Resolution (IFOV) | 4.53mrad |
Infrared Resolution | 80 x 80 Pixels |
Thermal Sensitivity (NETD) | <0.1°C at 30°C |
Image Frequency | 50Hz |
Focus Mode | Focus-Free |
Focal Length | 7.5mm |
Focal Plane Array (FPA) | Uncooled Microbolometer |
Spectral Range | 8-14μm |
Temperature Range | |
Temperature Accuracy | |
DC Voltage Range | |
DC Voltage Resolution | 0.1mV to 1V |
DC Voltage Accuracy | ±0.5% |
AC Voltage Range | |
AC Voltage Resolution | 0.001V to 1V |
AC Voltage Accuracy | ±1.2% |
Resistance Range | |
Resistance Resolution | 0.1Ω to 0.01MΩ |
Resistance Accuracy | ±1.0% |
Frequency Range | |
Frequency Resolution | 0.01Hz to 0.01MHz |
Frequency Accuracy | ±0.2% |
Duty Cycle Range | 10% to 90% |
Capacitance Range | |
Capacitance Resolution | 0.01nF to 1μF |
Capacitance Accuracy | ±3.0% |
- 6000 Count 3.5’’ TFT Colour LCD Display
- Built-in Thermal Imager with Max, Min and Center Crosshair Targeting
- 50Hz Fast Thermal Image Frame Rate
- DC Voltage
- AC, AC+DC TRMS Voltage
- VFD (Variable Frequency Drive) measurements
- Low Ohms measurements
- Flexible Clamp or Coil can be used to measure high currents
- Resistance and Continuity Test
- Diode Test
- Capacitance
- Frequency
- Duty Cycle
- Temperature with K-Type Probe
- Insulation Tester
- PI/DAR Test
- Data Logger Function and Recall
- Re-chargeable battery and battery charger
- Safety: IEC/EN61010-1, EMC IEC/EN 61326-1, 61557-1-2-4, Double Insulation
- Pollution Level 2
- Over Voltage Category: CAT IV 600V, CAT III 1000VÂ
Be the first to review “PRO RMTi-1 Rotating Machine Tester with Thermal Imager”
You must be logged in to post a review.
Reviews
There are no reviews yet.