NEW

PRO RMT-10 Rotating Machine Tester

44,955.00 including GST @18%

NEW LAUNCH!!

AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic), Duty Cycle, Diode Test, Insulation Test and Continuity, Thermocouple Temperature. Store and recall data. Waterproof, rugged design for heavy duty use. While using as an Insulation Tester, Polarisation Index (PI) and DAR measurements.

Compare
Compare

Description

An ideal tool to test all machines and motors. The instrument can be used as a Digital Multimeter, an Insulation Tester, as well as a 4-wire Low Resistance Tester.

This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic), Duty Cycle, Diode Test, Insulation Test and Continuity plus Thermocouple Temperature. It can store and recall data. It features a waterproof, rugged design for heavy duty use. While using as an Insulation Tester, Polarisation Index (PI) and DAR measurements can also be done. 

Additional information

Brand

Model

Warranty

Colour

Display

Diode & Continuity

Peak Hold

Peak Hold

Sensor Type

K-Type Sensor

Input Impedance

>10MΩ VDC, >9MΩ VAC

AC Response

True RMS

Bandwidth

50Hz to 1000Hz AC

Crest Factor

≤3 at full scale up to 500V, decreasing linearly to ≤1.5 at 1000V

Over Range Indication

Auto Power Off

Measurement Rate

3 times per second

Low Battery Indication

Power Source

Battery Operated

Battery Type

Alkaline

Battery Size

AA

No of Batteries

6

Polarization Index Test

PI

Dielectric Absorption Ratio

DAR

Max/Min/Avg/Dif

Data Hold

Data Record

Data Recording Feature for auto and manual records

Bluetooth

DC Voltage Range

DC Voltage Resolution

0.01mV to 0.1V

DC Voltage Accuracy

±0.1%

AC Voltage Range

AC Voltage Resolution

0.01mV to 0.1V

AC Voltage Accuracy

±1.0%

DC Current Range

DC Current Resolution

0.01µA to 0.001A

DC Current Accuracy

±1%

Resistance Range

Resistance Resolution

0.01Ω to 0.001MΩ

Resistance Accuracy

±1.0%

AC Current Range

AC Current Resolution

0.01µA to 0.001A

AC Current Accuracy

±1.5%

Capacitance Range

Capacitance Resolution

0.01nF to 0.0001mF

Capacitance Accuracy

±3.5%

Frequency Range

Frequency Resolution

0.001Hz to 0.001MHz

Frequency Accuracy

±0.3%

Certifications

, , , , , , , ,

  • Display 50,000 Counts backlit liquid crystal with bar graph
  • V DC or V AC 1000V DC/AC RMS
  • mA AC/DC 500mA 1000V fast acting fuse
  • A AC/DC 10A 1000V fast acting fuse (20A for 30 seconds max every 15 minutes)
  • Frequency
  • Resistance
  • Capacitance
  • Duty Cycle
  • Diode Test
  • Continuity
  • Temperature -50°C to 1200°C
  • Bluetooth for sharing data with Smartphone and free App to share, store and analyse data
  • Surge Protection: 8kV peak per IEC 61010
  • Enclosure Double-moulded, waterproof Shock (Drop Test) 3.2 feet (1m)
  • Diode Test Test current of 0.9mA maximum , open circuit voltage 2.8V DC typical
  • Continuity Check: Audible signal will sound if the resistance is less than 50W (approx.), test current <0.35mA
  • PEAK: Captures peaks >1ms
  • Temperature Sensor requires type K thermocouple
  • Input Impedance >10MΩ VDC & >9MΩ VAC
  • AC Response True RMS
  • ACV Bandwidth 50Hz to 1000Hz
  • Crest Factor ≤3 at full scale up to 500V, decreasing linearly to ≤1.5 at 1000V
  • Overrange indication “OL” is displayed
  • Auto Power Off 15 minutes (approximately) with disable feature
  • Polarity Automatic (no indication for positive); Minus (-) sign for negative
  • Measurement Rate 3 times per second, nominal
  • Low Battery Indication
  • Safety: Double insulation per EN61010-1 and IEC61010-1 2nd Edition (2001) to Category IV 600V and Category III 1000V; Pollution Degree 2. The meter also meets UL 61010-1, 2nd Edition (2004), CAN/CSA C22.2 No. 61010-1 2nd Edition (2004), and UL 61010B-2-031, 1st Edition (2003)
  • Polarisation Index
  • Di-Electric Absorption Ratio
  • MAX / MIN Hold
  • Peak Hold
  • Data Hold Data
  • Recording Feature for auto and manual records

Reviews

There are no reviews yet.


Be the first to review “PRO RMT-10 Rotating Machine Tester”