1811 ELCB Tester

17,415.00 including GST @18%

Digital ELCB Tester with Current rating up to 500mA featuring Auto Ramp,Phase Switch, Reads Disconnection Time. Battery-powered.

Category:
Compare
Compare

Description

Digital ELCB RCCD Tester with Current rating up to 500mA, Auto Ramp,Phase Switch, Reads Disconnection Time, Battery-Powered

RCD, RCCB, ELCB Ramp Testing using Metravi 1811 RCD tester


Video embedding powered by Webilop

Additional information

Model

Brand

Warranty

Colour

Display

Phase Angle

The RCD test can be selected to start from a positive (0°) or a negative (180°) half cycle

Data Hold

Alarm

Alarm is issued when contact voltage is larger than selected limit value during RCD test

Over Range Indication

Ramp Test Mode

Auto RAMP test

Auto Power Off

Power Source

Battery Operated

Battery Size

AA

Battery Type

Alkaline

No of Batteries

6

Earthing Systems

L-N voltage measurement, L-P-E voltage measurement

Operating Voltage

230V/50Hz

Frequency Range

Resolution

,

Accuracy

±3%

Certifications

, , , ,

Trip Current

10/20/30/100/300/500mA

Trip Time

2000mS/1000mS/300mS/40mS

Voltage Measurement Function

30V to 600V

  • Suitable for Use on 230V/50Hz single-phase line (operating voltage: 195~253V);
  • Adopts Micro-Processor Chip to maintain high accuracy, reliability  and stability;
  •  Wiring Check: three –LED indication When P-E and P-N green LED are on and red LED is off, the wiring is correct; otherwise it indicates wrong wiring(reverse P and N or bad grounding);
  •  Phase Angle Selection: The tests can be performed at positive 0 or negative 180 phase angle.
  • Over-Load Indication: “OL mS” shows when trip time exceeds Max. test time
  • Auto Data Hold: The test results will be maintained for a while after the tests finishes.
  • Auto Ramp Test: Test trip current and trip time simultaneously
  •  Power-Off Warning Indication: The buzzer alarms after operating  for 3minutes;
  • Battery Powered
  • Fused Protection
  • Double or Reinforced Insulation for safe design.
  • Trip Current Setting: 10 / 20 / 30 / 100 / 300 / 500mA
  • Confirms to IEC 61010-1 CAT III 300V, IEC 61557-1,5 and IEC 61010-2-31

4 reviews for 1811 ELCB Tester

  1. 5 out of 5

    kishore60kumar

    Checking an RCCB in service/post installation using 1811:
    Youtube link: https://youtu.be/w3E8WeLcfHU

  2. 5 out of 5

    Kishore Kumar

    RCCB Ramp testing using Metravi 1811 RCD tester: https://youtu.be/VyQeQckVLR8

  3. 5 out of 5

    Kishore Kumar

    Metravi 1811 Ramp Test demo link:
    https://youtu.be/VyQeQckVLR8

  4. 5 out of 5

    Kishore Kumar

    Sturdy, portable and accurate.


Add a review