OS-5030C Cathode Ray Oscilloscope

36,450.00 including GST @18%

30MHz Dual Channel Dual Trace Cathode Ray Oscilloscope with component test facility, comes complete with 1:1 and 10:1 probes

Compare
Compare

Description

30MHz Dual Channel Dual Trace Cathode Ray Oscilloscope with component test facility, comes complete with 1:1 and 10:1 probes

 

Additional information

Model

Brand

Warranty

Colour

No of Channel

Dual

Bandwidth

30MHz

Deflection Factor

5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps

Rising Time

<18nS

Input Voltage

400Vpk

Trigger Source

ALT, EXT, POWER, Y1, Y2

Trigger Coupling

AC/DC (EXT), NORM/TV-H, TV-V

Trigger Sweep Mode

AUTO, LOCK, SINGLE, TRIG

Sweep Time

0.1uS to 0.2S/div in 20 calibrated steps of 1-2-5 sequence

Calibration Signal

0.5V Square wave of 1kHz

CTR Display

8cm x 10cm

Component Test Facility

Component Test

  • Dual Trace Dual Channel Oscilloscope with Component Test Facility
  • Bandwidth: 30MHz
  • Full bandwidth sweeping circuit is used in the sweeping system
  • The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
  • ALT trigger to observe signals from two irrelative channels
  • The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
  • From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the Ext frequency counter
  • Y deflection operation: Y1, Y2, ALT, CHOP, ADD, mode X-Y
  • Vertical Deflection: 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
  • Rising time: < 18nS
  • Maximum Input Voltage: 400V (DC +ACp-p)
  • Triggering Source: Y1, Y2, ALT, POWER, EXT
  • Trigger Coupling: AC/DC (EXT), NORM/TV-H, TV-V
  • Horizontal Sweep Mode: AUTO, TRIG, LOCK, SINGLE
  • Sweep time factor: 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
  • Magnification: x10
  • X-Y Mode input: X-Axis YI and Y-Axis Y2
  • Z Axis minimum input level: TTL Level
  • Component Test Facility
  • Calibration Signal: Square wave of 0.5V at 1kHz
  • CTR Display size: 8cm x 10cm

Reviews

There are no reviews yet.


Be the first to review “OS-5030C Cathode Ray Oscilloscope”