OS-5060 Cathode Ray Oscilloscope
₹87,704.00 including GST @18%
60MHz Dual Channel Four Trace Cathode Ray Oscilloscope with 1:1 and 10:1 Probes
- Description
- Additional information
- Specifications
- Catalogue
- Reviews (0)
Description
60MHz Dual Channel Four Trace Cathode Ray Oscilloscope with 1:1 and 10:1 Probes
Additional information
| Model | |
|---|---|
| Brand | |
| Warranty | |
| Colour | |
| No of Channel | Dual |
| Bandwidth | 60MHz |
| Sensitivity | 1mV/Div |
| Auto Focus | Focus deviation is automatically corrected |
| Deflection Factor | 5mV/Div to 5V/Div in 1-2- 5 sequence in 10 steps |
| Deflection Factor Accuracy | ±3% |
| Rise Time | 6nS |
| Input Voltage | 400Vpk |
| Input Coupling System | AC-GND-DC |
| Operating Systems | ADD, CH1, CH2, DUAL |
| Sweep Time | 0.1uS to 0.2S/div in 20 calibrated steps of 1-2-5 sequence |
| Sweep Expansion | 20ns/div to 20ms/div |
| Trigger Mode | AUTO, NORM, TV-H, TV-V |
| Calibration Signal | 0.5V Square wave of 1kHz |
| Certifications | |
| Hold-off Function | Continuous change for 2 times |
- Dual Channel Four Trace Oscilloscope
- Bandwidth: 60MHz
- Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997)
- High Sensitivity: 1mV/Div
- Waveforms are parallax-free with CRT’s internal graticule
- Alt Mag: The waveform (x1) and the x10 magnified waveforms can be displayed simultaneously
- Alt Trig: Stabilized triggering is accomplished with two unrelated signals
- TV Synchronization: Stable TV signals are displayed using new circuitry
- Auto Focus: Focus deviation is automatically corrected
- Vertical Deflection: 5mV/Div to 5V/Div in 1-2-5 sequence in 10 steps for both channels
- Accuracy: ±3%
- Rise Time: 6nS approx.
- Maximum Input Voltage: 400V (DC + AC Peak)
- Input coupling system: AC-GND-DC
- Operation system: CH1, CH2, ADD and DUAL
- Time Base sweep Mode: x1, x5; x1, x5ALT
- Sweep Time: 0.1uS to 0.2S/iv in 20 calibrated steps of 1-2-5 sequence
- Sweep Expansion: 10ns/div to 20ms/div
- Alt Mag Trace: Maximum 4 traces
- Trigger Mode: AUTO, NORM, TV-V, TV-H
- Trigger Signal Source: INT, CH2, LINE, EXT
- X-Y Operation Mode: CH1, X-axis and CH2, Y-axis
- Z-Axis badwidth: DC to 2MHz
- Calibration Signal: 0.5V Square wave of 1kHz
- Auxiliary Power Supply: 230V 50Hz AC
Be the first to review “OS-5060 Cathode Ray Oscilloscope”
You must be logged in to post a review.
Reviews
There are no reviews yet.