- Description
- Additional information
- Specifications
- Catalogue
- Reviews (0)
Description
100MHz Dual Channel Four Trace Cathode Ray Oscilloscope with 1:1 and 10:1 Probes
Additional information
| Model | |
|---|---|
| Brand | |
| Warranty | |
| Colour | |
| No of Channel | Dual |
| Bandwidth | 100MHz |
| Deflection Factor | 5mV/Div to 5V/Div in 1-2- 5 sequence in 10 steps |
| Deflection Factor Accuracy | ±5% |
| Input Voltage | 400Vpk |
| Trigger Mode | CH2, EXT, INT, LINE |
| Trigger Sweep Mode | AUTO, NORM, TV-H, TV-V |
| Calibration Signal | 0.5V Square wave of 1kHz |
| Hold-off Function | Continuous change for 2 times |
| Delay System | Continuous delay or Triggered delay |
| Sweep Time | A: 0.05uS to 0.2S/Div ±5% in 21 calibrated steps, B: 0.05uS to 10uS/Div ±5% in 8 calibrated steps |
| Certifications | |
| External Trigger Input | About 1m.Ohms 25pF impedance |
| Rise Time | 3.5nS |
| Operating Systems | ADD, CH1, CH2, DUAL |
- Dual Channel Four Trace Oscilloscope•Bandwidth: 100MHz•Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997)•It has the function of B delay sweep•High sensitivity: 1mV/DIV
- In ALT (A and B alternately sweeps) mode, four traces are displayed
- Fast sweep rate to 5ns/DIV by magnifying 10
- The function of B TRIG’D can decrease the delay shrinking
- The hold-off function makes it easier to catch the complex triggering signals
- Vertical deflection sensitivity: 5mV/Div to 5V/Div in 1-2- 5 sequence in 10 steps
- Accuracy: ±5%
- Rise Time: 3.5nS
- Maximum Input Voltage : 400V (DC + AC peak)
- Operating Systems: CH1, CH2, ADD, DUAL (CHOP, ALT)
- Trigger mode: AUTO, NORM, TV-V, TV-H
- Trigger signal source: INT, CH2, LINE, EXT
- External trigger input: About 1m.Ohms 25pF impedance
- Z-axis maximum input: 30V (DC+AC peak) voltage
- Bandwidth: DC to 2MHz
- Sweep Mode : A,B, B Triggered, X-Y, ALT
- Sweep time :
- A: 0.05uS to 0.2S/Div ±5% in 21 calibrated steps (1-2-5 seq)
- B: 0.05uS to 10uS/Div ±5% in 8 calibrated steps (1-2-5 seq)
•Delay system : Continuous delay or triggered delay
- Hold-off: Continuous change for 2 times
- X-Y Operation mode : CH1 X-axis and CH2 Y-axis
- Calibration Signal : 0.5V Square wave of 1kHz
- Auxiliary Power Supply : 230V 50Hz AC
Be the first to review “OS-5100 Cathode Ray Oscilloscope”
You must be logged in to post a review.
Reviews
There are no reviews yet.