- Description
- Additional information
- Specifications
- Catalogue
- Reviews (0)
Description
20MHz, Dual Trace Dual Channel Oscilloscope
Additional information
| Model | |
|---|---|
| Brand | |
| Warranty | |
| Colour | |
| No of Channel | Dual |
| Bandwidth | 20MHz |
| Deflection Factor | 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps |
| Rising Time | <18nS |
| Trigger Source | ALT, EXT, POWER, Y1, Y2 |
| Trigger Coupling | AC/DC (EXT), NORM/TV-H, TV-V |
| Trigger Sweep Mode | AUTO, LOCK, SINGLE, TRIG |
| Sweep Time | 0.1uS to 0.2S/div in 20 calibrated steps of 1-2-5 sequence |
| Calibration Signal | 0.5V Square wave of 1kHz |
- Dual Trace Dual Channel Oscilloscope
- Bandwidth: 20MHz
- Full bandwidth sweeping circuit is used in the sweeping system
- The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
- ALT trigger to observe signals from two irrelative channels
- The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
- From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the Ext frequency counter
- Y deflection operation: Y1, Y2, ALT, CHOP, ADD, mode X-Y
- Vertical Deflection: 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
- Rising time: < 18nS
- Maximum Input Voltage: 400V (DC +ACp-p)
- Triggering Source: Y1, Y2, ALT, POWER, EXT
- Trigger Coupling: AC/DC (EXT), NORM/TV-H, TV-V
- Horizontal Sweep Mode: AUTO, TRIG, LOCK, SINGLE
- Sweep time factor: 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
- Magnification: x10
- X-Y Mode input: X-Axis YI and Y-Axis Y2
- Z Axis minimum input level: TTL Level
- Calibration Signal: Square wave of 0.5V at 1kHz
- CTR Display size: 8cm x 10cm
Be the first to review “OS-5020 Dual Channel Oscilloscope”
You must be logged in to post a review.
Reviews
There are no reviews yet.