NEW

GD-09-1M Combustible Gas Detector and Alarm

2,633.00 including GST @18%

NEW LAUNCH!!
Combustible Gas Detector and Alarm with high sensitivity, compact design and reliable performance for detecting combustible gas (like LPG) leaks. Features audible alarm with red flashing light, when gas concentrations reach or exceed the alarm set point.

Compare
Compare

Description

NEW LAUNCH!!

The Metravi GD-09-1 Combustible Gas Detector and Alarm, has high sensitivity, a compact design and reliable performance for detecting combustible gas (like LPG) leaks.

Adopting high-quality smart sensors and advanced techniques, the device is suitable for gas leak detection at premises where gas leaks are possible to occur, such as households, hotels, shopping malls, cafes, industrial kitchens, offices, canteens, etc.

The device sounds an alarm with red flashing light, when gas concentrations reach or exceed the alarm set point, helping keep people safe from accidents like fire, explosion, suffocation, etc., due to the leak. 

Where in the room should the sensor plug be installed?
The detector/sensor should be installed at a distance from the gas source radius within 1.5M, more than 30cms below the ceiling for methane (like LNG) or more than 30cm above the floor for propane and butane (like LPG).

 

Metravi GD-09-1M has Audible & Visual Alarms


Video embedding powered by Webilop

Additional information

Brand

Colour

Model

Warranty

Detecting Gases

Combustible Gas

Sensor Type

Semiconductor Sensor

Sampling Method

Diffusion

Alarm Set Point

5% LEL

Warm-up Time

180+10S

Response Time

≤30sec

Recovery Time

≤30S

Working Voltage

AC 110V-220V

Maximum Power

<1W

Alarm Mode

Beep sound with red indicator light

Alarm

Audio Alarm, Visual Alarm

Alarm Sound

≥70dB

Temperature Range

Humidity Range

0%RH to 97%RH

Pressure Range

86kPa to 106kPa

Plug Pin Type

Two-pin

  • Gas Detected: Combustible gases like LPG, Hydrogen, Methane, Propane, Iso-butane, etc.
  • Sensor Type: Semi-conductor
  • Sampling Method: Diffusion
  • Alarm Set Point: 5% LEL
  • Response Time: ≤30 secs
  • Recovery Time: ≤30 secs
  • Working Voltage: AC 110V-220V
  • Plug PIn Type: Two-pin
  • Alarm: Red flashing light with beep-beep audible alarm
  • Alarm Sound: ≥70dB

Reviews

There are no reviews yet.


Be the first to review “GD-09-1M Combustible Gas Detector and Alarm”