PM-39 Process Meter

69,863.00 including GST @18%

5 Digits, Digital Multimeter combined with source for DC voltage, resistance, frequency, thermocouples, thermal resistance, and DC current. supply power to 24V circuits and meanwhile measure current; with built-in250 Ω HART loop resistance

Category:
Compare
Compare

Description

5 Digits, Digital Multimeter combined with source for DC voltage, resistance, frequency, thermocouples, thermal resistance, and DC current. supply power to 24V circuits and meanwhile measure current; with built-in250 Ω HART loop resistance

Additional information

Model

Brand

Warranty

Colour

Display

Power Source

Battery Operated

Battery Type

Alkaline

Battery Size

LR6

No of Batteries

4

Low Battery Indication

Auto Power Off

Warm-up Time

10 min

Dust & Water Proof

Certifications

, ,

Overload Indication

Overload Indication

Measurement Rate

20 times / second for fast, 5 times / second for slow

DC Voltage Range

DC Voltage Resolution

0.01mV to 1V

DC Voltage Accuracy

±0.1%

AC Voltage Range

AC Voltage Resolution

0.001V to 1V

AC Voltage Accuracy

±0.5%

Resistance Range

DC Current Range

DC Current Resolution

0.001mA to 0.01mA

DC Current Accuracy

±0.1%

AC Current Range

AC Current Resolution

0.001mA to 0.01mA

AC Current Accuracy

±0.5%

Frequency Range

Frequency Accuracy

0.02%

Frequency Resolution

0.0001Hz to 0.001kHz

Loop Power Supply

24V

  • An industrial tool that combines Digital Multimeter and process signal source for on-spot maintenance.
  • Double color plastic injection shell to meet IP65 dust-proof and waterproof grade, and can be used in harsh environment.
  • Complies with 600V CAT.IV, 1000V CAT.III safety standard.

Basic feature of input measurement   

  • Measurement functions include: AC voltage, DC voltage, AC current, DC current, Ohms, capacitance, continuity, diode, frequency, RTD, Thermocouples – R, S, B, K, E, J, T, N.
  • The displayed reading of measured voltage, resistance and diode is 5500 bytes, and the basic accuracy is 0.1%.
  • The displayed reading of measured current is 55000 bytes, and the basic accuracy is 0.1%.
  • Measurement speed ratio: 20 times / second for fast, and 5 times/ second for slow.
  • True measured AC value, measurement bandwidth: 45Hz~400Hz
  • Selectable manual or auto range, measurement value held displays.
  • Relative value measurement(REL_%)

Basic feature of output measurement   

  • Max accuracy of output can reach 0.2%, and the output display is 5-digit.Output function: DC voltage, DC current, Ohms, frequency, RTD, Thermocouples – R, S, B, K, E, J, T, N , SIMULATE function analog transmitter
  • Displays mA and % value simultaneously and provide 25% and 100% manual-step, auto-step and auto-ramping output function when outputting DC current
  • Built-in 24V loop circuit.

Loop test function

  • Provide 24V loop circuit and measure current simultaneously.
  • Built-in 24V loop circuit and loop current measurement
  • Built-in and selectable 250 Ω HART loop resistance and loop power supply, easy for HART communication equipment, without carrying load resistance and power.
  • Built-in temperature transmitter, auto cold-compensation, and display in ℃ or ℉.
  • Large LCD of double show, with white backlight.
  • The meter employs panel calibration technique, connects to standard device, undertakes panel calibration operation according to set range, and saves relevant calibrated data, fulfills the periodic calibration work stipulated by the meter to ensure the accuracy and performance.
  • The meter can supply power with four alkaline batteries or Ni-mh batteries in the battery case, or use the adaptor to supply.
  • Other functions: Auto power shut off, Auto backlight shut, Low electrical test, Temperature unit setting etc.

Reviews

There are no reviews yet.


Be the first to review “PM-39 Process Meter”